Current time: 01-21-2018, 06:24 AM Hello There, Guest! (LoginRegister)
Thread Closed 
[Guide] How to apply RG Flags and colors
06-17-2014, 04:05 PM (This post was last modified: 01-23-2016 11:26 PM by 77nascar7777.)
Post: #1
[Guide] How to apply RG Flags and colors
A player recently asked if there was a [Guide] to something like this, since there aren't any tutorials I might as well as put one up myself Smile


Here's a list of color commands you can use when you step inside a RG.

&e Yellow
&a Green
&d Purple/Pink
&k Glitch
&l Bold
&c Red
&b Cyan/Aqua
&n Underline
&m -----Strikethrough-----
&2 Dark Green
&3 Dark Cyan/Aqua
&4 Dark Red
&5 Dark Purple
&6 Dark yellow (gold)
&7 Light grey
&8 Dark grey
&9 Blue
&0 Black

[Image: 2XsXk2Z.png?1]


Here's the command to set it up.

/rg flag <rg id> greeting <Message>



There are many different rg flag commands you can try out as well.

/rg flag <rg id> vehicle-place ALLOW This will allow players to place boats, and minecarts and related objects inside your rg. You can turn it off by typing: /rg flag <rg id> vehicle-place DENY

/rg flag <rg id> build ALLOW/DENY will set up whether or not you would want players to build within a RG. (NOTICE) Turning the flag on will effect the owner as well!
Typing /rg flag <rg id> build Will remove the flag.

/rg flag <rg id> sleep ALLOW/DENY will deny or allow access to beds.
(This will not allow you to sleep through the night unless everyone in the server does as well)

/rg flag <rg id> farewell <message> This command is similar to the Greeting flag. However it works when the player leaves the RG.

/rg flag <rg id> chest-access DENY Will turn /unlock-ed chests un-openable to players who aren't added to the rg. The same works with furnaces.

/rg flag <rg id> pistons ALLOW/DENY Will allow/deny piston use inside your rg.

/rg flag <rg id> construct As far as I'm aware, this flag is broken and hopefully it can be fixed by the developers.

/rg flag <rg id> use ALLOW/DENY "Will allow or block the ability to use doors, buttons, pressure plates, levers, etc"-Wiki

Questions

(How do I set up a separate rg within the same rg I already put up? And how will it work?)



A very well planned out tutorial is located here http://www.cubeville.org/forum/thread-5951.html
All of your questions can be answered by wacktopia's [Guide] to subzoning.

[Image: 1b8cae829e.jpg]
Find all posts by this user
06-18-2014, 01:24 PM
Post: #2
RE: [Guide] How to apply RG Flags and colors
This is very helpful! Thanks Nas! Big Grin
Find all posts by this user
06-18-2014, 04:40 PM
Post: #3
RE: [Guide] How to apply RG Flags and colors
I started building a tutorial for this in IceVille but gave up and left just the color codes behind Tongue

Probably wouldn't hurt to add this to the Region tutorial wing too.

[Image: KbvnMTu.png]
Visit this user's website Find all posts by this user
06-18-2014, 05:07 PM
Post: #4
RE: [Guide] How to apply RG Flags and colors
(06-18-2014 04:40 PM)Landon193 Wrote:  I started building a tutorial for this in IceVille but gave up and left just the color codes behind Tongue

Probably wouldn't hurt to add this to the Region tutorial wing too.

Moved it to the protection guides section of the forums Smile

"Work is made not to be done" -GoalieGuy6
[Image: jpd.png]
[Image: randomrob7.png]
Find all posts by this user
Thread Closed 




User(s) browsing this thread: 1 Guest(s)